Wednesday, May 15, 2013
Class Notes 2
Class Notes 2
Today, we will return to two techniques we introduced in the previous class: Tui (Pushing) and An (Pressing). But we will be using different tools with these techniques, thus transforming them from relatively superficial techniques to deeper and more penetrating techniques.
Before we go into this, we should return to issues of proper body mechanics, because these will be even more critical as we use certain tools (especially the fingers and thumbs).
BODY MECHANICS REVISITED
When you apply any sort of pressure to a patient's body:
1) Think of a way to open ALL (or as many) joints between you and the point of contact. When you "open a joint", don't open it too much (in other words, don't "lock" a joint) because it will tend to cause an obstruction in your body, and will lead to eventual injury. Instead, open each joint "just enough" to allow your weight/force to "flow through" into the patient's body.
Imagine that your arms are like tree roots, only these roots don't suck water up, they push water out (like a garden hose, only with more structure). You definitely don't want any "kinks" in your tree-root-arms, because then the water won't be able to flow out of you. "Kinks" can be caused by joints that are too closed (like a bent elbow) OR too open (like a locked elbow). You again want your arms to be open "just enough" to allow the water/force/weight to flow through.
Certain joints have a tendency to be "too open" and thus prone to injury: the thumbs, the fingers, and the wrist, for example. Some joints tend to be "too closed": the elbow sometimes, and also the shoulder. Try to experiment to find the optimum "flow" between your body and the point of contact. IT SHOULD FEEL RELAXED!!!
Hints: Try to keep your fingers slightly curled when using their tips. Fingers and thumbs in particularly are prone to injury due to hyper extension (too open). Also, always keep your elbows dropped. This is a key idea in Taijiquan, but it is effective here. If you ever raise your elbow, you will notice what a strain it puts on your shoulder. So keep them down!
WEIGHT SCALE DEMONSTRATION
2) Related to the idea of OPENING the joints is that of STACKING the joints. Imagine that you are building a tower out of a stack of building blocks. The tricky thing is that when you are using your thumbs/fingers, you are building this tower with a SMALL foundation. Nevertheless, if this tower is going to stand, each successive block (or joint) must be "centered" over the previous one.
Imagine if you were building a tower of blocks, and each successive block was stacked too far to the left. Eventually, the tower of blocks would have to fall to the left. Similarly, when we apply pressure, if we don't "stack" our joints in an even and consistent way, then the "bottom joints" will have to collapse (leading to ineffective techniques AND possible injury).
3) Reinforcement: If you are using small tools like your thumbs, then it is best to do some sort of reinforcement. You have two hands, so you might as well use them together to reinforce each other. For example, instead of applying pressure with only ONE THUMB, try putting two next to each other.
Other examples of reinforcement include the technique I demonstrated in the previous class, of bracing the elbow against the hip.
Still other examples include using one hand as a guide for an unsteady or wobbly tool (more on this later).
4) The issue of HEIGHT. Okay, this is probably the biggest issue most of us face when working on people. In the clinic, we are usually working on people ON TABLES. If we want to perform our techniques with any degree of success, we have to make sure our bodies and their bodies have the optimum height relationship. If the patient is too high, then your techniques will be much weaker. If the patient is too low, then you will likely strain your back from bending over him/her.
WHAT CAN YOU DO?
Here are some suggestions:
a) Lower/raise the table.
b) Use a chair to prop yourself up.
c) Get on the table.
d) Modify your posture/technique.
With regards to d: Let me give an example. Let's say I wanted to work on a patient's trapezius muscles. I could stand up straight and apply pressure down on GB 21 AT AN ANGLE. But what if I happen to be very tall relative to the patient? I can't mechanically apply as much direct pressure as I'd like without feeling some kind of pressure in my back.
So what can I do? I can KNEEL at the optimum height (maybe even using a stool if I'm uncomfortable kneeling). I can kneel so that my shoulders and the patient's GB 21 are at the same height. Then I can apply pressure more directly into the contact point.
Note: the astute may see that this seems to contradict the principle of keeping the hara close to the point of contact. But in reality, this is just maintaining that balance, but with more emphasis on opening the joints (this time, including the shoulder).
5) USE WEIGHT NOT FORCE whenever possible. AFTER you've opened up your joints, etc. THEN USE YOUR BODY WEIGHT to FLOW INTO THE PATIENT. Recall the image of the tree roots that POUR WATER. Once the roots are in place, THEN if you "lean" (tip the tree), the water/weight will naturally FLOW into the patient.
The order of this is, I think, essential. If you are not structurally prepared (i.e. open, stacked joints, etc.) then when you lean your weight, your arms/hands/fingers will be structurally unsound, and will tend to buckle or, in any case, suffer unnecessary stress.
ATTITUDE REVISITED
Last time I spoke about maintaining an attitude of exploration, not attack. Let's expand on this idea.
Oftentimes when we encounter hardness, our first instinct is to "strike it." Unfortunately, this is not a very healing way of doing things. Striking things tends to produce a single sharp penetrative "spike," with no endurance.
Think about cutting butter with your finger. What happens if you attempt to karate chop a stick of butter with your finger? More likely than not, you will get "butterfinger." (SORRY BAD JOKE). Seriously, you'll probably only end up with the butter stuck around your finger.
But what if instead, you applied slow and steady pressure on the butter? Gradually, the butter would open around your finger, until you were able to cut it in half. This is our ideal when we penetrate. We are not trying to "cut through" in one swift strike. We are instead trying to "sink in" through patience and "weight/wait."
You can also think of this in terms of Yin and Yang. Generally, if you really want to get into the Yin (or deep) part of the body, you need to sink in slowly. If, on the other hand, you only want to emphasize the Yang (or shallow) part of the body, you can use rapid, superficial techniques. Because of the way the body generally protects itself, if you use rapid, penetrative “attacks,” the body will tend to tense up and prevent you from going deep.
CORN STARCH EXPERIMENT
Okay, now let's practice some of our techniques.
PRESSING (AN)
Pressing is actually easier to practice, since it only involves putting weight into an object (there is no additional vector).
Last time, we used Palm Pressing.
Experiment with Pressing with other tools:
1) Different Parts of the PALM: the thenar eminence, the hypothenar eminence, the heel of the palm, the "knuckles"/head of the palm
2) Different Parts of the FIST: the palm side of the fist, the pinky side of the fist, the knuckle side of the fist, the back of the fist
3) The wrist (similar to the palm and the fist): the palmar side, the dorsal side
4) The PROXIMAL INTERPHALANGEAL JOINTS (the "second" knuckles of the fingers)
5) The fingers (THIS IS DIFFICULT!!!): first, try individual fingers, just to see how that feels; then, try different pairs or groups of fingers; then, try all fingers together or spread out; experiment with using different edges of the fingers (i.e., not just the finger tips, but also the pads and the lateral edges); FINALLY, try to figure out ways to REINFORCE the fingers (via other fingers of one hand, or with the other hand)
6) The thumb (AGAIN, DIFFICULT!!!): experiment with ways to use the thumb in such a way that it is not uncomfortable or hyperextended; think about how the other fingers act as support for the thumb; use different surfaces of the thumb; find ways to reinforce the thumb
7) The forearm: experiment with different sides of the forearm
8) The elbow (VERY VERY DANGEROUS!!!): please, at this point, experiment on a massage TABLE, not on a person. Until you feel comfortable and can exercise control with this tool, don't use it on a person. It really can cause significant injury if you're not careful. That being said, try: using different elbow surfaces, using different angles.
What are some other tools you can think of?
Okay, now let's move on to PUSHING (TUI).
This is a harder technique, because in addition to the pressure, you are adding a direction. This means several things:
First, make sure the patient is prepared. Usually, for the more penetrative forms of Tui, exposed skin is better. It's not that you can't do Tui on clothing, it's just that it tends to stretch or even tear things. As you might imagine, you can't just do Tui on exposed skin alone either. You need to use some kind of liniment, NOT TOO GREASY, or your technique will just slip around (it won't have any penetration).
Second, you need to make sure that you are able to Push a fair distance without feeling yourself get overextended. You may need to get closer to the table. You may need to prop yourself up over the patient. You may need to take a different stance.
Now, even though this technique has a directional element to it, don't forget: open/stack the joints first, then add weight (penetration), AND THEN (and only then) attempt to add a direction.
Please experiment with many of the same tools used for the Pressing exercise.
You may find some tools are more amenable to Pushing. For example, using the forearm seems great for Pushing, because it feels like you are a motor grader or a bulldozer.
PRACTICE
Work on the patient’s back, with the patient lying face down.
Start with some Rubbing (Mo Fa) with the Palm. Remember to find a good place to stand to practice your techniques.
Press (An Fa) the back with the Palm. There are different ways to do this. DO NOT PRESS DIRECTLY ON THE SPINE. Instead, press on the paraspinal muscles to either side of the spine.
Try to Press with both hands on either side of the spine. First, press with even pressure on both hands. Then, try to SLOWLY alternate pressure between one hand and the next (BE CAREFUL DOING THIS. Imagine you are Walking on eggshells, and too much pressure will cause things to crack). Start from the head of the table, and work your way down as far as is comfortable. When you feel yourself overreaching, switch to standing to one side of the table and work your way down.
*ALTERNATIVELY, only for those who are comfortable with this, you can go on the table, straddling the patient, and press the mid to lower back.
You may also START from one side of the table, and press on the contralateral (opposite) side of the spine, as though you are trying to push tissue away from the spine. You can “walk” your way down the spine.
Switch between the different tools: Palm, Fist, Wrist, Knuckles (PIPs), Fingers, Thumbs, Forearms, Elbows. Communicate with your patient to ask what each tool and technique feels like. Also, notice in yourself, what tools and techniques feel comfortable and effective.
Practice your Pushing (TUI) with different tools. This will require more Rooting, and more of a focus on your stance. It will also require a LIGHT amount of liniment. Work down the length of the back, and to keep things simple, just do one side at a time. Start with the Palm, then go on to the other tools: Fist, *Wrist, Knuckles, *Fingers, *Thumbs, Forearms. The tools with asterisks need to be done with caution. If you feel any discomfort, change something about how you’re doing the technique or discontinue it for now.
Practice with the Elbow only on the table surface for now. It is very dangerous...
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment